GY-NEO6MV2 NEO-6M GPS Navigation Module with Ceramic Antenna and EEPROM
The GY-NEO6MV2 NEO-6M GPS Module is a high-performance navigation solution designed for Arduino, APM 2.0, and APM 2.5 flight controllers. With its powerful ceramic antenna, built-in EEPROM, and backup battery support, this GPS module ensures accurate positioning, fast satellite lock, and reliable data storage. At Bigyan Project, we provide the original NEO-6M module that is trusted by students, researchers, and hobbyists for robotics, drones, and autonomous vehicle projects. Whether you are building a quadcopter, a self-driving car prototype, or a location-based IoT device, this GPS unit delivers consistent performance and dependable results.
Product Specifications
| Model |
GY-NEO6MV2 NEO-6M |
| Chipset |
Ublox NEO-6M GPS |
| Power Supply |
3V–5V DC |
| Interface |
RS232 TTL |
| Default Baud Rate |
9600bps |
| Backup Battery |
MS621FE |
| EEPROM |
Stores configuration data even after power-off |
| LED Indicator |
Signal and lock status |
| Antenna |
25x25mm ceramic antenna with strong signal |
| Module Size |
25mm x 35mm |
| Mounting Hole |
3mm |
| Compatibility |
Arduino, APM 2.0, APM 2.5, Flight Controllers |
Features
- High sensitivity Ublox NEO-6M GPS chipset for precise navigation
- Wide power range support from 3V to 5V for flexible use
- Built-in EEPROM retains configuration settings after power loss
- Data backup battery ensures stable performance during restarts
- Compact 25x35mm module with standard 3mm mounting holes
- 25x25mm ceramic antenna provides strong GPS signal reception
- LED status indicator for satellite lock and activity monitoring
- Compatible with Arduino, APM 2.0, APM 2.5, and other flight control boards
- Trusted by students, makers, and engineers for robotics and UAV projects
Applications / Use Cases
- Drone navigation and flight control systems
- Robotics and autonomous vehicle guidance
- Outdoor navigation projects for students
- Self-driving car prototypes and GPS trackers
- Geolocation-based IoT devices
- Science fair and university research projects
User Guide / How to Use
Using the GY-NEO6MV2 GPS Module is straightforward:
- Connect the module’s VCC pin to a 3V–5V power supply
- Connect TX/RX pins to your Arduino or APM controller using RS232 TTL interface
- Ensure the antenna faces upwards for better satellite reception
- Use Arduino IDE or APM Mission Planner to read GPS coordinates
- The LED will indicate when the module has acquired a satellite lock
- EEPROM automatically saves your configurations, so settings remain after restart
Frequently Asked Questions (FAQs)
- Q: Does this module work with Arduino Uno?
A: Yes, it is fully compatible with Arduino Uno and other Arduino boards.
- Q: How many satellites can the NEO-6M connect to?
A: It can connect to up to 22 satellites for precise location tracking.
- Q: What is the accuracy of the GPS readings?
A: The module provides an accuracy of 2.5 meters under open sky conditions.
- Q: Can I use it indoors?
A: GPS signals are weak indoors; outdoor use is recommended for reliable results.
- Q: Does it support data saving after power-off?
A: Yes, the built-in EEPROM and backup battery keep your settings stored.
Challenges and Considerations
- GPS accuracy decreases in areas with tall buildings or heavy tree cover
- Cold start may take longer to acquire satellite lock compared to hot start
- Requires outdoor environment for best performance
- Interference from RF devices may reduce signal quality
Compatibility
- Arduino Uno, Nano, Mega, and other boards
- APM 2.0 and APM 2.5 flight controllers
- Compatible with most open-source flight control systems
- Suitable for robotics, UAV, and IoT applications
Future Enhancement Options
- Integration with GSM/GPRS modules for remote GPS tracking
- Upgrading to higher accuracy GPS modules like NEO-7M or NEO-M8N
- Adding SD card storage for GPS data logging
- Combining with IMU sensors for advanced navigation
Benefits
- Accurate and reliable GPS positioning
- Easy to integrate with Arduino and flight controllers
- EEPROM ensures stable configuration saving
- Strong ceramic antenna for quick satellite lock
- Trusted module available at Bigyan Project
Conclusion
The GY-NEO6MV2 NEO-6M GPS Module is one of the most popular and reliable GPS solutions for Arduino and flight controllers. With its ceramic antenna, EEPROM, and backup battery, it ensures consistent and accurate navigation for drones, robots, and other GPS-enabled projects. Whether you are a student building a science project, a hobbyist experimenting with UAVs, or a developer working on autonomous systems, this module provides the right balance of performance and affordability. Available now at Bigyan Project, it is the ideal GPS module for your next innovation.
Important Notice
The product details on this page are collected from multiple reliable sources. Minor discrepancies may occur, so please check labels, instructions, and warnings before use.
Note: Images are for illustration only and may slightly differ from the actual product.
Unboxing Video: Please record an unboxing video showing the package was unopened before opening. Required for claims of missing, damaged, or incorrect items.
What is the price of GY-NEO6MV2 NEO-6M GPS Module with Antenna for Arduino in Bangladesh?
The GY-NEO6MV2 NEO-6M GPS Module with Antenna for Arduino is available in Bangladesh at a price of ৳400. It is available now at Biggan Project with reliable service.